Lamons Sterling Seal and Supply (STCC) ORBN391 Number-391 Standard O-Ring, Buna Nitrile Rubber, 22" ID, 22-3/8" OD

Sterling Seal & Supply Buna N or Nitrile, is a copolymer of butadiene and acrylonitrile. Acrylonitrile content is varied in commercial products from 18% to 48%. As the nitrile content increases, resistance to petroleum base oils and hydrocarbon fuels increases, but low temperature flexibility decreases. Due to its excellent resistance to petroleum products, and its ability to be compounded for service over a temperature range of -65 to + 275 degrees F (- 54 to +135 degrees C), Nitrile is the most widely used elastomer in the seal industry today. Most military rubber specifications for fuel and oil resistant MS and AN 0-rings require nitrile base compounds. It should be mentioned, however, that to obtain good resistance to low temperature with nitrile compounding, it is almost always necessary to sacrifice some high temperature fuel and oil resistance. Nitrile compounds are superior to most elastomers with regard to compression set or cold flow, tear and abrasion resistance. Inherently, they do possess good resistance to ozone, sunlight or weather but this can be substantially improved through compounding. However, since ozone and weather resistance are not always built in, seals from nitrile bases should not be stored near electric motors or other equipment which may generate ozone, or in direct sunlight. ORBN391

• For use across a wide temperature range from -30 degrees F (-34 degrees C) to 250 degrees F (121 degrees C)
• Oil resistant applications of all types. Low temperature military uses. Off-road equipment. Automotive, marine, aircraft fuel systems
• Compatible with Aliphatic Hydrocarbons (propane, butane, petroleum oil, mineral oils and greases, diesel fuel and fuel oil)
• Not Compatible with product fuels with a high aromatic content; aromatic hydrocarbons (benzene); Chlorinated hydrocarbons (Trichloroethylene)
• Buna N or Nitrile has good mechanical properties when compared with other elastomers and high wear resistance. Good/Excellent resistance to many petroleum oils/greases, hydraulic fluids, alcohol, mineral oil and grease